Information:
HD 1280X960 Flashlight Camera Multifunctional DVR PC Camera High Definition Video Recording 8GB
A. Introduction
Thanks for purchasing this product. It is equipped with various practical functions integrating digital
photography, video recorder and audio recorder function, with fashionable and dainty appearance, stable
and outstanding quality, wide and diversified purposes. It will bring you the new and memorable
experiences of use and is the indispensable tool for you.
The functions of this machine include:
High definition video recording.
High definition photography.
Quality audio record.
PC camera.
Movable disk.
Laser flashlight.
LED flashlight.
Gas detector.
Alarm.
The characteristics of this machine include various functions, various purpose, fashionable appearance,
outstanding video recording effect, handy and portable, easy use, stability, reliability and rapid response,
etc.
This machine is applicable for the purposes of reporter interview, wonderful snap shoot, emergency
record, living fragment record, recreation record, sports record, aided teaching record, family security
monitoring, criminal investigation and evidence-collecting for legal purpose, landscape record during
travel, outdoors exploration record, backing memory, and auxiliary lighting and sent SOS signal etc.
B. Product Profile
Description
1 Operation key
It??s a multi-functional key with different functions in different
modes and states, including power-on, power-off, start to
record video, stop recording video, take photos, start to record
audio and stop recording audio.
2 Mode key
Used to switch over the operating modes.
3 Alarm key
Used to turn on the alarm.
4 Flashlight power switch
A power switch of laser and flashlight.
5 Hanging pendant hole
The hole to hang the pendant.
6 Gas detector indicator
Very high concentration indicator.
7 Gas detector indicator
High concentration indicator.
8 Gas detector standby
indicator
Low concentration indicator, Gas detector standby indicator.
9 Standard 5 Pin USB
The interface for connecting the data line and power cord.
10 Gas detector sensor
Used to detect CO, CH4, H2, CH3CH2OH.
11 Laser
Laser shot from here.
Warning: Do not direct vision laser, do not use laser light
toward the eyes.
12 Gas detector power key
Keep press the button, turn on the gas detector.
Release the button, turn off the gas detector.
13 LED
Used to Illuminate.
14 Alarm speaker
Alarm speaker.
15 Mic
Used to catch the audio signals.
16 DV indicator lamps
There are three built-in cyan, green and blue indicator lamps,
three lamps in three colors may indicate the different
operating states of products in different combination modes.
17 Camera
Used to catch image signals.
C. Usage
1. DV Startup and Power-off??
1.1 Startup
a. Press OPERATION KEY (part 1) for 2 seconds and then release it.
b. The power of product is turned on, the GREEN lamp will turn on and the product will enter into
the initialization status.
c. The GREEN lamp will turn off when the initialization is completed.
d. After startup, the device will enter into the default recording function standby status and the
BLUE lamp will turn on.
e. Startup is completed.
Note: The startup of this machine is similar to that of computer with a startup course, never make
any operation during this course till the startup is completed. The time duration of startup
initialization depends on the capacity of memory.
1.2 Power-off
a. Press OPERATION KEY (part 1) for 2 seconds and then release it.
b. The status indicator lamps will turn off to complete power-off.
Note: If the product is working when you turn off it, The system will automatically save the files
being recorded at present and power off.
2. Switch over the Operating Modes
a. Press Key 2 shortly in startup status of this product to switch over the operating modes.
b. The operating modes of products may be switched over between three functions of video
record, photograph and sound record.
c. If operating mode is switched over when the product is used to record video, take pictures or
record the system will automatically save the files being recorded at present and then switch over
to the next operating mode.
3. Video Record
a. It will enter into the default video record mode after startup or switch over to video record
mode by the MODE SWITCH.
b. The BLUE light will keep on when the device is in standby status of this mode.
c. Press the OPERATION KEY shortly to start the video record and the BLUE lamp will turn from
constantly ON status to even and slow flicker status.
d. Press OPERATION KEY shortly again to stop video recording and save the file being
recorded, the BLUE light will turn from flicker status to constantly ON status.
Note: Please removing protective film before use the camera. To guarantee the size and safety
of photography files, the system will automatically save the file once every 50 minutes and
continue to record video. Please make sure the camera not being blocked with sufficient
illumination, keep the product body vertical and stable, with over 50cm distance with the objects
to be recorded to get the images with right direction, natural colors, clear images and stable
images. Never block the microphone sound gate to ensure the sound recording effect.
4. Take Pictures
a. Switch over the device to photograph mode.
b. The GREEN light will keep on when the device is in standby status of this mode.
c. It will take three pictures and the GREEN light will flicker once every time the OPERATION
KEY is pressed shortly.
Note: Please make sure the camera not being blocked with sufficient illumination, keep the
product body vertical and stable, with over 50cm distance with the objects to be recorded to get
the images with right direction, natural colors, clear images and stable images.
5. Audio Record
a??Switch over the device to audio record mode.
b??The CYAN light will keep on when the device is in standby status of this mode.
c??Press the OPERATION KEY shortly to start the audio record and the CYAN lamp will turn from
constantly ON status to even and slow flicker status.
d??Press OPERATION KEY shortly again to stop audio recording and save the file being
recorded, the CYAN light will turn from flicker status to constantly ON status.
Note: To guarantee the size and safety of photography files, the system will automatically save
the file once every 60 minutes and continue to record audio. Never block the microphone sound
gate to ensure the sound recording effect.
6. PC Camera
When the unit is in this mode, you can chat with your friends on line with web camera, or hold the
net-conference with your co-workers of company; or you can apply the novel and interesting
purposes like shooting posters, etc. via the Windows programs provided by any third party. The
method of entering into computer web camera mode is shown as below.
a. Turn on the device at first. use the data cable to connect your product to computer USB port.
b. Enter the PC Camera mode, Open MY COMPUTER, the icon of web cam will appear on the
screen to indicate that the web cam function of product is started up normally.
Note: Not always that the computer can detect web cam function due to the computer
configuration or the system differences. If the product cannot enter into web cam mode, but into
the movable disk mode occasionally, please remove this unit, start up this unit and re-connect it
to the computer. If you just use the computer web cam function of this machine on your computer
for the first time, please install the web cam driver attached to the floppy disk or provided by the
distributor; to prevent this product from being damaged, please connect one end of data line to
the computer before connecting it to the computer, connect the other end of data line to the
computer. Temporarily, the computer web cam function of this unit can only support WINDOWS
operating system.
7. Movable disk
This unit may be used as a movable disk, with the method of usage shown as below.
a. Turn off the device, connect the device to the computer with USB data cable, the movable disk
icon will pop up in the computer.
b. The directory for saving video file is *Disk\ _REC\100MEDIA.
c. To dismantle the device, please click the movable device management icon at the right lower
corner to remove this movable memory device and after the computer has confirmed to
disconnect the hardware safety, disconnect the device and computer.
Note: The time for computer to identify the movable disk is relative to the computer configuration,
operating system and memory capacity, please wait patiently during this course and never
operate the unit, which may affect the hardware identification. If the movable disk cannot be
recognized for a long time, please try to re-connect; if it is not recognized yet, please confirm if
your operating system, motherboard driver, USB port and connection line can work normally.
8. Set Time and Date
You can set up the time and date attribute upon recording files and add the time and date water
mark at the lower right corner of audio files in the format of Year, Month, Date Hour: Minute:
Second. The method t set up the time, date and water mark is shown as below:
a. Turn off the power source of product. connect the computer . open the movable hard disc.
right click at the blank space of root directory. move the mouse above CREATE NEW option of
the popup menu. select the TEXT DOCUMENT. name this text document as time and pay
attention to its filename extension of .txt. create the time setup file; you can also create the
folder on the computer desktop, other disk partitions and in other folders and then copy it to the
root directory of movable disk.
b. Open time text document and input the time setup character strings in it, the character strings
are composed of year, month, date hour, minute, second and water mark switch. Please set
time as per the following format:
Video with time water mark: 2010.01.01 12.01.01 Y
Video without time water mark: 2010.01.01 12.01.01 N
The time character strings in the above-mentioned format is the time value you want to set up
and pay attention to type a spacebar between year, month, date and hour, minute, second. Y and
N at the end serve as the control character on the video file for adding the time water mark, Y
indicates Yes?? Add water mark and N indicates No?? Hide water mark, the relative attributes of
recorded files cannot be modified by this method.
c. confirmed that the time setup file has been copied to the root directory, uninstall the hardware,
start up and complete the time setup.
NOTE: Please refer to the time setup model contained in CD, or you can copy it to your computer
for change, make sure to save the file.
9. Alarm
Press the alarm button, alarm sounded immediately, the status lights will turn red. Alarms can be
used to send SOS signals.
10. Laser
Slide the flashlight switch to LASER side, will open the laser. Laser can be used as teaching aids,
when you are trapped in danger, they can be used to send distress signals.
Slide the switch to Middle, Power off the laser.
Warning: Do not direct vision laser, do not use laser light toward the eyes.
11. LED
Slide the flashlight switch to LED side, will open the LED. LED flashlight can be used for the
camera lighting.
Slide the switch to Middle, Power off the LED flashlight.
12. Gas detector
Carbon monoxide and methane is the main component of natural gas. The device can detect a
high concentration of natural gas, hydrogen, ethanol. When the concentration exceeds a certain
range, it will alarm. Use this function as follows.
a. Press the power button, don??t release it. the HIGH and LOW lamps will turn on and the product
will enter into the initialization status, the alarm will sound when the product is being initialized.
b. After the initialization is complete, the HIGH and LOW lamps will turn off, the READY lamp will
turn on. Don??t release the button.
c. Put the gas detector into the air which contain dangerous gases. If the concentration is low,
the READY lamp will turn on. If the concentration is high, the LOW lamp will turn on. If the
concentration is very high, the HIGH lamp and the alarm will turn on.
d. Put the device in a well ventilated place after use.
Warning: This gas detector??s sensor can only detect high concentrations of CO, CH4, H2,
CH3CH2OH. Can not detect other dangerous gases. It is not a professional gas detection
equipment, The structure??s level, precision??s level, sensitivity??s level, response speed??s level of
this device as low as a toy. So, don??t to determine whether the air is safe according to the results
of tests of this device.
13. Charge
Connect the product to the power adaptor or computer to charge it. The BLUE light will flicker
slowly when the battery is being charged and will keep on when the battery is charged completely.
Note: This unit is built in with high capacity polymer lithium battery without memory effect, which
may be charged during use. But for the first five times of use, please run out the battery power
and then charge to the full to activate the highest capacity of battery and obtain the standard
working hours; to maximize the battery power storage capacity, please continue to charge for 30
minutes to 1 hour when the indicator lamp indicates the full charging status upon charging every
time. Please make sure that the power supply complies with the standard USB power supply
specifications.
14. FAQs
a. Q: Why the indicator lamp does not respond after I have pressed the startup key on my device
for a long time?
A: Please check if the device power is run out and it??s recommended to connect the power
adaptor, computer or standby power source to charge the product, then try if it may be powered
on normally.
b. Q: Why the BLUE and GREEN lights on my product will flicker rapidly and simultaneously and
then the product will automatically power off 5 seconds later?
A: When it happens during operation, it indicates that the memory space runs out, the device
will automatically save the file being recorded at present and it indicates the auto power-off
around 5 seconds. If you shall continue to record video files, please delete the files you don??t
need again from the computer.
c. Q: Why the BLUE and GREEN lights on my product will flicker alternatively and then the
product will automatically power off 5 seconds later?
A: It indicates the insufficient battery power, it??s recommended to use this player after it is
charged completely.
d. Q: What shall I do if my product cannot respond for more than 1 minutes and no keypad can
respond?
A: You need reset the device. Press OPERATION KEY and MODE KEY at the same time.
D. Parameters
Item
Parameters
Video format
AVI
Video encoding
M-JPEG
Media playing software
Attached software of the operating system or Mainstream audio and
video media playing software, recommend Kmplayer
Picture format
JPG
Udisk supporting OS
Windows me/2000/xp/2003/vista/7, Mac OS10.4 (uncertainty, depends on
the computer model)
PC Camera
Windows me/2000/xp/2003/vista/7
charge pressure
DC-5V
Interface type
Mini 5 Pin USB
Storage support
8GB
Battery type
high-capacity lithium polymer
E. Warning
. Application: Please strictly abide relevant regulations and laws. This product should not be
used for any illegal purposes. The user is fully responsible for its using purpose.
. Battery: If do not use this recording function after long time, please charged it fully before using.
. File security: This product is not a professional storage device. It does not guarantee the
integrity and security of saved files. Please back up your important documents on the computer or
other storage device timely.
. Video quality: This product is not a professional video recording device. It Does not guarantee
the effect of the video file to have the professional quality
. Operating temperature: 0??40?ヮ For the extension of life, it is best used at room temperature.
. Shooting brightness: Do not expose the camera directly to strong light, such as the sun light,
to avoid damage to optical devices.
. Cleaning: Do not use it under the environment with high dust density to avoid the contamination
of camera lens or other components.
 
 
 
|
New Products
